(1) Processing capacity 200-450 pieces of anode/hour (optional)

(2) Technical performance parameters

1) 100mm from the center of the plate with the same name (optional)

2) The number of positive plate blocks per slot is 55 (optional)

(3) Design description:

1) This equipment has the functions of anodic flattening, ear correcting, ear milling and row spacing, and the side milling ear is required separately;

2) anodic verticality: after the ear is milling, the ear is used to hang the anode naturally, and 95% of the anodic deviation from the perpendicular is less than or equal to 3mm;

3) After the pressure shaping of the entire anode plate surface, the Angle diagonal measurement shows that the straightness of the anode mold surface is less than or equal to 3mm;

4) pole distance: the distance between the same plate is 100mm. After adjusting the distance, the side measure is carried out from the ear of the anode die surface. The accuracy of each distance is less than or equal to 1.5mm, and the cumulative accuracy should be less than or equal to 2.5mm;

5) Noise: less than 85dB;

6) Weighing accuracy: ±1.5kg